2:1 heat shrink tubing in pre-cut 5 metre packs from Krimpterm, in black or red. Standard 2:1 tube recovers to half its supplied diameter when heated and closes down tight over wire, crimped terminals and soldered joints.
The range runs from 1.2mm for fine electronic and signal wire up to 38.1mm for battery leads and larger cables. Red and black are the usual pair for marking positive and negative on DC and automotive circuits.
To choose a size, the supplied bore has to pass over the widest part of the joint, and the recovered size must be smaller than the cable so the tube grips. Each pack is 5m of one size and colour. Available in 11 sizes and 2 colours.
Typical uses
- Insulating soldered joints on electronic and signal wire
- Covering crimped terminals and connector barrels
- Marking positive and negative on battery and DC leads
- Finishing the ends of cable sheaths
Specification
- Brand: Krimpterm
- Range: Heat Shrink Tubing
- Product: 2:1 Pre-Cut 5M Electrical Heat Shrink Tubing Packs
- Pack: 5M
- Colours: Black, Red
- Sizes: 1.2mm, 1.6mm, 2.4mm, 3.2mm, 4.8mm, 6.4mm, 9.5mm, 12.7mm, 19.1mm, 25.4mm, 38.1mm
Krimpterm product codes: H1.2-5M-BLA, H1.6-5M-BLA, H2.4-5M-BLA, H3.2-5M-BLA, H4.8-5M-BLA, H6.4-5M-BLA, H9.5-5M-BLA, H12.7-5M-BLA, H19.1-5M-BLA, H25.4-5M-BLA, H38.1-5M-BLA, H1.2-5M-RED, H1.6-5M-RED, H2.4-5M-RED, H3.2-5M-RED, H4.8-5M-RED, H6.4-5M-RED, H9.5-5M-RED, H12.7-5M-RED, H19.1-5M-RED, H25.4-5M-RED, H38.1-5M-RED