The Portwest FR516 PW3 Modaflame Rain+ Hi-Vis Multi-Norm FR Winter Coverall is built for cold, wet outdoor sites where flame resistance, high visibility and weather protection all matter at once. It has a removable helmet compatible adjustable hood with a shaped peak, adjustable cuffs, bottom loading knee pad pockets and zipped side leg openings, and comes in Orange/Black and Yellow/Black.
Frequently Asked Questions
What certifications does the FR516 carry?
The FR516 is certified to EN ISO 11612 (A1+A2, B1, C1, F1) for heat and flame, EN ISO 11611 Class 1 (A1+A2) for welding, EN 1149-5 for antistatic protection, EN 61482-1-1 and EN 61482-1-2 APC 2 for arc flash, EN 13034 Type 6 for limited chemical splash, EN ISO 20471 Class 3 for high visibility, EN 343 Class 4:1 X for weather protection, and EN 342 for cold protection.
Is the FR516 arc-flash rated?
Yes. It carries an EN 61482-1-1 rating of ATPV 37 cal/cm² (ELIM 32 cal/cm²), and holds APC 2 under EN 61482-1-2, the higher of the two arc protection classes. Always check this against your site's arc flash risk assessment before use.
Can I wear the FR516 for welding?
Yes, within its rated class. The FR516 is certified to EN ISO 11611 Class 1 (A1+A2), which covers less hazardous welding situations, such as lower spatter and radiant heat exposure, than Class 2. For higher-risk welding work, check whether a Class 2 garment is required instead.
Is the FR516 waterproof?
It's rated Class 4:1 X under EN 343, meaning the top water penetration resistance tier under the updated standard, paired with the lowest breathability class. It's built to keep rain and wind out first, so expect a warmer, less breathable feel than a lightweight waterproof shell.
Does the FR516 keep you warm in cold weather?
Yes. It's also certified to EN 342 for protection against cold, with a measured thermal insulation value of 0.343 m²·K/W, on top of its winter-weight FR construction.
Is the FR516 approved for rail (RIS) work?
The FR516 carries RIS-3279-TOM Issue 2 approval, but only in the Orange/Black colourway. The Yellow/Black option is not RIS-approved, so choose Orange/Black specifically if you need rail industry compliance.
How should I wash and care for the FR516 to keep its FR protection?
Follow the care label sewn into the garment, and avoid fabric softener and bleach based products, which can degrade flame resistant fibres over time. The FR protection is built into the fabric itself, not a coating, so it won't wash out, but damaged or heavily worn fabric can reduce protection. Retire the coverall if it's visibly damaged or fails a wash care check.
